Wall switch 2 buttons

    This switch is analogous to the "Wall switch 1 button". The only difference is the number of buttons and respectively the number of lights it can control. It consists of two logic devices, respectively for the both buttons.  

    Everything else is identical to the "Wall switch 1 Button”. It will allow you to control the lights from both the key and phone. It can be added to scenes and managed together with other devices in the scene. It is a network router and it is designed for indoor use to be mounted in a standard console box, should be connected to 0 and phase.

Functionality:

• Basic
• Identify
• On/Off
• Scenes
  

Join network:

1. install the Smart Switch following the instructions;
   
2. press "Add device" button under the Settings tab in HOUSEPER application;
   
3. press and hold the button on the Switch, until the LED indicator starts flashing;
   
4. device appears on Devices tab in HOUSEPER application after successful join;
   

Leave network:

1. press and hold the Switch button until the LED indicator turns blue. Release the button and press it again;
   
2. after the device leaves HOUSEPER network, red LED indicator flashes slowly for 3 seconds(2 times per second).

* The switch must be connected to 0 and phase