Temperature and humidity sensor



    This device is designed to monitor indoor temperature and humidity. Using built-in digital sensors, it measures and transmits real-time data to the HOUSEPER application. The accumulated data is provided in a pleasant graphical chart and can be viewed through smartphone. 

    The device comes with a battery included, insulated with a tape to prevent the battery drain. The insulating tape must be removed before the unit is installed. It is recommended that the unit not be placed too close to heating / cooling appliances. Installation of the device is quick and easy with double-sided tape. It joins the Houseper system by selecting "Add Device" in the app and holding the hidden device button in the small side hole for 2 seconds. indication 

    The sensor provides battery information and when it starts to drain, an indication will appear  and the battery should be replaced. It can have other type of alarm, such as  missing device when the connection to the device is lost.

       

Functionality:

• Basic
  
• Power Configuration
  
• Temperature
• Humidity

Join network:

1. press "Add device" button under the Settings tab in HOUSEPER application;
   
2. press the device button located in the little hole for 2 seconds till green LED flash quickly;
   
3. green LED keeps on for 3 seconds after successful join;
   
4. device appears on Devices tab in HOUSEPER application.
   

Leave network:

1. press the device button located in the little hole for 5 seconds to leave the network;
   
2. after the device leaves HOUSEPER network, the green light flashes slowly for 3 seconds.
   

* The batteries are included