Gas sensor

     The sensor is used to detect and prevent gas leakage hazards. It is equipped with a high quality gas sensor with high sensitivity and when the gas density in the air exceeds the allowable level, it generates an alarm through a red flashing LED light and the integrated siren.

    The unit plugs directly into the socket and easily connects to the Houseper system. When it is activate and a gas leak is detected, an alarm indicator will be displayed  and depending on your settings, it can send an instant notification to smart phone, emails, and trigger a Siren device. It is a part of the group of home security devices and as such it can have different types of alarms, such as:

     - a missing device when the connection to the device is lost. 

     - trouble, indicates device malfunction.

Functionality:

• Basic
  
• Identify
  
• Zone

Alarm indication:

• red LED flash
  
• build-in "beep" sound alarm
• siren activation from HOUSEPER system
  
• smart phone notification from HOUSEPER system
  
• mail from HOUSEPER system
  

Join network:

1. insert  the gas detector into socket. Buzzer will "beep" once and green LED blink once
   
2. yellow, red and green LEDs start repetitively flashing for 3 minutes, finishing with permanent green light;
   
3. press "Add device" button under the Settings tab in HOUSEPER application;
   
4. keep pressing the device button located in the little hole for 2 seconds till green LED start flashing quickly;
5. green LED stops flash and starts lighting permanently after successful join;
6. device appears on Devices tab in HOUSEPER application.
   

Leave network:

1. press the device button located in the little hole for 5 seconds to leave the network;
   
2. after the device leaves HOUSEPER network, the green light flashes slowly for 3 seconds.