Carbon monoxide sensor

    The sensor is designed to detect high levels of carbon monoxide (CO) and provide immediate information to protect people's lives and health. It is installed indoors by means of a double-sided tape on the ceiling and it is particularly suitable for heating with a fireplace or a wood stove. Also, carbon monoxide sources could be some heating and / or gas appliances placed in locations with poor ventilation and lack of ventilation. Cigarette smoke and car exhaust can also contain high concentrations of CO. Carbon monoxide lacks color and odor, making it difficult to detect by humans. It is toxic and may cause poisoning by inhalation of large quantities.


CO sensor

    

    Once the device is added to the Houseper system, don‘t forget to activate it. When a high concentration of carbon monoxide is detected, the red LED will start flashing quickly, an integrated into the device sound alarm will switch on, an alarm Alarm will appear in the application and depends of the settings, a notification can be sent to an email or smartphone and a Siren device can be triggered. 

    Also the sensor can generate a low battery alarm Battery, missing device Missing device, tamper Tamper, trouble Trouble.


     The sensor comes with a battery included, insulated with a protective strap, which must be removed before installation. The device has extremely low power consumption and a very long battery life.

   

Functionality:

  • Basic
  • Power Configuration
  • Zone

Alarm indication:

  • red LED flash quickly
  • build-in sound alarm
  • siren activation from HOUSEPER system
  • smart phone notification from HOUSEPER system
  • mail from HOUSEPER system

Join network:

  1. press "Add device" button under the Settings tab in HOUSEPER application;
  2. press the device button located in the little hole for 2 seconds till green LED flash quickly;
  3. green LED keeps on for 3 seconds after successful join;
  4. device appears on Devices tab in HOUSEPER application.

Leave network:

  1. press the device button located in the little hole for 5 seconds to leave the network;
  2. after the device leaves HOUSEPER network, the green light flashes slowly for 3 seconds.


* The batteries are included


Device Specifications
Networking type Zigbee HA 1.2
Wireless Networking Distance 70m (open area)
Router (network extender) No
Endpoints 1 x Carbon Monoxide Sensor
Working temperature -10℃ ~ +50℃
Working humidity ≤95%RH
Sound level 85 dB/1m
Power Supply Specifications
Power Supply DC 3V
Battery 1xCR123A or 1xCR17335

Write a review

Please login or register to review

Carbon monoxide sensor

  • Product Code: GTVE-GD-ZBCD18T6
  • Availability: In Stock
  • 135.88лв.

  • Ex Tax: 113.23лв.

Related Products

Houseper controller (4G LTE)

Houseper controller (4G LTE)

    Android 7.1 TV Box, Kodi media player, 4G LTE, Zigbee 3.0, battery reserved ..

410.71лв. Ex Tax: 342.26лв.

Water leakage sensor

Water leakage sensor

     The sensor is designed for early detection of floods and sending timely informat..

63.60лв. Ex Tax: 53.00лв.

Photoelectric smoke sensor

Photoelectric smoke sensor

     The sensor is intended for timely detection of smoke and sending information in ..

74.71лв. Ex Tax: 62.26лв.

Panic button

Panic button

     The device can send an alarm when an emergency occurs. Added to the Houseper sys..

50.62лв. Ex Tax: 42.18лв.